论信息产业就业总量的核算方法

21世纪是知识经济的时代，知识经济最活跃的生产部门是那些广泛应用高新技术的新兴产业，信息产业是首当其冲的一个。信息产业的竞争追本溯源是知识与技术的竞争，也就是人才的竞争。因而人力资本核算在信息产业核算研究中有着重要的理论和现实意义，本文在说明有关统计指标的基础上，就信息产业的就业总量中纯信息部门就业总量核算、混合信息部门就业总量核算以及整个信息部门就业核算这几个方面进行了核算方法的研究。     

NUM-1060 Ⅱ CNC系统自动回零程序设计

本文介绍了采用NUM-1060ⅡCNC系统，在设计制造CX600数控车铣加工中心过程中，通过E变量判断回零状态，调用Part功能子程序，完成自动回零的方法。该方法切实可行，已用于生产实际。     

HSDB网络稳定性的研究

高速数据总线（ＨｉｇｈＳｐｅｅｄＤａｔａＢｕｓ，ＨＳＤＢ）是新一代航空电子系统的数据总路线，ＨＳＤＢ网络实际上是基于线性令牌总线的一个专用计算机局域网，在网络上负载较重且时间非苛刻的消息到达是一般过程的条件十分别讨论了网络的局域和全域稳定性，并导出了保证整个网络稳定的令牌握有定时器最小值，同时给出了如何根据应用去调整得到的理论值。     

固体火箭发动机／导弹一体化设计

以某一两级固体地—空导弹作为算例,研究了固体火箭发动机/导弹一体化设计问题。研究以导弹起飞质量最轻和可用过载最大为目标建立了目标函数,利用优化理论完成了7个设计变量的优化设计。优化结果表明,所建立的数学模型是正确的。     

一般高速数据总线网络的吞吐量分析

分析了一般高速数据总线网络优先权方案的特性，建立了一般ＨＳＤＢ网络多优先权的平均吞吐量模型，导出了不同优先权的平均吞吐量解析表达式，并通过软件仿真验证了由得到的解析表达式。     

逆金字塔式安全着陆点选择方法

针对现有地外天体软着陆安全着陆点选择方法的不足,设计了逆金字塔式安全着陆点选择方法,结合着陆器的落点精度和自主避障及地形坡度适应能力,建立了基于平整点、安全着陆点、可靠避障点和标称着陆点的地形安全性分析与定量搜索模型,该模型呈四层逆金字塔结构,每一层搜索的结果作为下一层搜索的输入,从弱约束到强约束逐步收敛至100%地形安全着陆区,嫦娥五号探测器飞行结果表明该方法能够快速确定安全着陆区及标称着陆点,并有效指导着陆下降过程的标称航迹设计和轨道控制策略制定。     

共面变相位星座多目标交汇序列优化方法

针对空间多目标交汇时空约束繁杂、轨道能量影响变量多的特点,从空间几何解析法入手,提出基于穿越点的共面变相位交汇方法,在Lambert椭圆轨道机动的基础上,给出了机动装置共面变轨相位快速确定方法,总结了变轨速度需求以及运载段分离条件已知情况下相位角和转移时间的包络区,并基于覆盖效能对目标发射序列进行了优化,仿真验证了相关结论,得到的结果符合预期。     

Characterization of ionospheric amplitude scintillations using wavelet entropy detrended GNSS data

The extensive monitoring networks of Global Navigation Satellite System (GNSS) ionospheric scintillation have been established to continuously log observation data. Further, the amplitude scintillation index and the phase scintillation index, which are derived from scintillation observations, are anticipated to accommodate the accuracy requirement of both the user level and the monitoring station level. However, raw scintillation observations essentially measure superposed waveform impairments of GNSS signals propagating through ionosphere and troposphere. It implies that fluctuations of raw scintillation observations are caused by multiple factors from the entire radio propagation environment. Hence, it is crucial to characterize ionospheric scintillations from GNSS observation data. And the characterization is implemented through extracting fluctuations of raw observations merely induced by ionospheric scintillations. Designed to address this problem by means of Fourier filtering detrending, the present work investigates the influence of varying detrending cutoff frequencies on wavelet statistical energy and wavelet entropy distributions of scintillation data. It consequently derives criteria on the optimum detrending cutoff frequency for three types of raw amplitude scintillation data, which are classified by their wavelet energy distributions. Results of the present work verify that detrending with specific optimum cutoff frequencies rather than the fixed and universally applicable one renders the validity and credibility of characterizing ionospheric scintillations as the part of GNSS observation fluctuations purely induced by ionosphere electron density irregularities whose scale sizes are comparable with or smaller than the Fresnel scale.     

Nanofillers modification of Epocast 50-A1/946 epoxy for bonded joints

Epocast 50-A1/946 epoxy was primarily developed for joining and repairing of composite aircraft structural components. The objective of the present work is to modify the Epocast epoxy resin by different nanofillers infusion. The used nanofillers include multi-walled carbon nanotubes（MWCNTs）, SiC and Al2O3 nanoparticles. The nanofillers with different weight percentages are ultrasonically dispersed in the epoxy resin. The sonication time and amplitude for MWCNTs are reduced compared to Al2O3 and SiC nanoparticles to avoid the damage of MWCNTs during sonication processes. The fabricated neat epoxy and twelve nanocomposite panels were characterized via standard tension and in-plane shear tests. The experimental results show that the nanocomposites materials with 0.5wt% MWCNTs, 1.5wt% SiC and 1.5wt% Al2O3 nanoparticles have the highest improvement in the tensile properties compared to the other nanofiller loading percentages.The improvements in the shear properties of these nanocomposite materials were respectively equal to 5.5%, 4.9%, and 6.3% for shear strengths, and 10.3%, 16.0%, and 8.1% for shear moduli. The optimum nanofiller loading percentages will be used in the following papers concerning their effect on the bonded joints/repairs of carbon fiber reinforced composites.     

机场终端区域电磁环境分析

主要分析了机场终端区域主要使用的无线电设备及位置分布,各种无线电设备对电磁环境的要求以及信号覆盖、信号强度,对可能存在的干扰进行简单的分析,为进一步对机场终端区电磁环境仿真奠定理论基础。最后,本文对广汉机场的电磁环境进行了具体分析。